Back to blog
Guides November 3, 2026 4 min read

Types of Stripes: 15 Stripe Patterns and Their Names

By Pattern Weaver

Types of stripes explained: pinstripe, chalk, Bengal, Breton, awning, ticking, seersucker and more, with typical widths and the products each suits.

Types of Stripes: 15 Stripe Patterns and Their Names - seamless pattern design example 1
Types of Stripes: 15 Stripe Patterns and Their Names - seamless pattern design example 2
Types of Stripes: 15 Stripe Patterns and Their Names - seamless pattern design example 3
Types of Stripes: 15 Stripe Patterns and Their Names - seamless pattern design example 4

Order a "navy and white stripe" from three different suppliers and you can get three different fabrics, because stripes are named by width, spacing and construction, not by color. Knowing the names saves you a round of sampling, and it tells you which stripe fits which product.

1

The fifteen at a glance

Widths below are working rules of thumb for print, not standards. Scale them to the product.

StripeWhat it looks likeTypical scaleLives on
PinstripeHairline, single-thread line on a dark groundFine line, spaced well apartSuiting
Pencil stripeLike a pinstripe, a touch heavierFine to medium lineShirting, tailoring
Chalk stripeSoft, fuzzy line like drawn chalkMedium line, wide spacingWool suits, flannel
Bengal stripeEqual bands in two colorsRoughly a quarter inchDress shirts
Candy stripeNarrow color and white bandsNarrow, evenRibbon, kidswear
Breton stripeNavy bands narrower than whiteMedium, horizontalKnit tops
Awning stripeWide, bold, equal bandsOften several inchesCanvas, patio cushions
TickingDense narrow stripes, dark on creamNarrowPillows, upholstery
Hickory stripeNarrow blue and white workwear stripeNarrowOveralls, work shirts
Seersucker stripePuckered stripe from woven tensionMediumSummer suits, dresses
Regimental stripeDiagonal bands in club colorsMedium, on the biasNeckties
Rugby stripeWide horizontal bands, high contrastWideJerseys, polos
Regency stripeAlternating wide and narrow bandsWide plus narrowWallpaper, curtains
Shadow stripeTone on tone, same color, two finishesAnySatin-weave upholstery
Bayadère stripeMulticolor horizontal bands of varied widthsVariedBoho and resort prints
2

Telling look-alikes apart

Pinstripe, pencil, chalk. All three are fine lines on a darker ground. The difference is line weight and softness: pinstripe is crisp, pencil is slightly heavier, chalk is soft-edged and widely spaced. In print, give chalk a slightly irregular edge and the others clean vectors.

Bengal, candy, awning. These are all equal-width two-color bands. Treat width as the dividing line: candy is narrow, Bengal is mid-narrow, awning is wide. If the product is a pillow or a cabana chair, go awning. If it is a shirt, go Bengal.

Ticking and hickory. Ticking was woven tight to keep feathers from poking through a pillow, which is why it is dense and narrow. Hickory stripe is a similar narrow stripe with workwear associations. Both work in navy and cream, but ticking leans domestic and hickory leans utility.

3

Building a stripe so it repeats

A stripe is the easiest pattern to make seamless, as long as you respect one rule: the tile's width must be a whole multiple of the stripe unit. If your unit is one navy band plus one white band, the tile can be one unit wide or ten. If it is not a whole number, the seam will cut a stripe in half.

For a Breton, make the white band about one and a half times the navy width. For a Regency stripe, pick a repeat of one wide band plus one narrow band, then add a thin accent line between them. For a diagonal regimental stripe, set the tile on the diagonal angle (45 degrees is the usual choice) and check the corners.

Additional notes on width, rhythm and direction are in stripe pattern design.

4

Picking a palette

Stripes read through contrast first, hue second.

  • Classic navy and white: #1B2A4A with #F6F3EA. See navy and white patterns.
  • Tailoring gray: #2B2E33 ground with a #8A8F98 line for pinstripe patterns.
  • Summer seersucker blue: #B9D1EA with #FFFFFF.
  • Awning red: #B8342B with #FAF6EE.

If you want a stripe to feel modern, keep the palette to two colors and play with scale. If you want it traditional, add a thin third accent line.

5

Next steps

Stripes sit at the quiet end of the geometric patterns family, and they combine well with checks and dots. The guides to plaid and check patterns and dot patterns show how to pair them.

To test a stripe on real products, Product Mockups in Pattern Weaver are free and put a pattern on 20 products, so you can see how an awning stripe looks on a cushion before you commit.

Frequently asked questions

What is the difference between a pinstripe and a chalk stripe?

A pinstripe is a very fine, crisp line, while a chalk stripe is a thicker, softer line that looks as if chalk was dragged across the cloth. Chalk stripes usually sit on wool suiting and flannel, with wider spacing than pinstripes.

What is a Breton stripe?

A Breton stripe is a horizontal stripe in navy on a white or cream ground, with the navy bands narrower than the white. It comes from the French navy, which adopted striped knit tops in the mid-1800s.

What is the difference between an awning stripe and a Bengal stripe?

Both use equal-width bands in two colors, but an awning stripe is wide and bold, often several inches across, while a Bengal stripe is narrower, typically around a quarter inch. Awning stripes suit canvas and outdoor furniture, and Bengal stripes suit shirting.

Start with 5 free credits — no credit card required

AI-powered pattern generation

Try Pattern Weaver free

5 free credits. Full studio access. No credit card needed.

This site uses cookies to ensure you get the best experience. Learn more